EYS  Insulated Sectional Overhead Doors give guaranteed high thermal performance, avoiding cold bridging compared with traditional roller shutters

  • EYS Insulated Sectional Overhead Door panels have a thermal performance
    that is greater than required by Building Regulations
  • Windows can be installed in single or multiple panels
  • Panels can be prefinished in an extensive range of colours and materials
  • Doors accidentally damaged can be easily repaired using replacement
    materials and components

COMPOSITION

The use of quality materials and precise manufacturing controls ensure long service life in normal industrial and commercial applications.

Outer and Inner Sheet:
0.5mm hot dipped galvanised steel. Both inner and outer sheets are supplied “V” grooved to provide increased lateral strength, and the whole panel is made-up to form a “T+G” joint top and bottom.

Core:
39mm thick rigid polyurethane foam, density 40kg/m3.

Seal:
Low density compressible foam at panel base, and PVC Tape to the panel nose, all factory applied.

THERMAL PERFORMANCE

EYS use sectional door panels that provide high levels of insulation. The foam core between the inner and outer steel sheets of the door panel creates effective interruption of cold bridges, thus preventing transmission of heat or cold.

COLOURS & FINISHES

Outer Skin:
The outer skin is finished and coloured to match most contemporary building cladding.

Inner Skin:
The internal liner skin is finished in RAL 9010 white, polyester coated, stucco embossed galvanised steel as standard. Colour swatches available on request.

ACOUSTICS

The 40mm insulated door panel gives sound reduction of (Rw) 25db. Please note; this is for the panel only, and does not include joints, i.e. a fully installed door.

PANEL OPTIONS & ACCESSORIES

A range of windows in various sizes can be incorporated in the panel, the standard being 600 x 300mm with radiused corners. Each panel is fitted with pre punched galvanised steel end caps and the top and bottom panels are finished with an aluminium retainer which holds the top and bottom EPDM seals.
A range of locking options are available.

STANDARD PANELDIMENSIONS: 610 x 40, WEIGHT: 5.40kg/lin.m

TRACKS

Individually designed for each door

  • Fully galvanised
  • Bolted and riveted or spot welded

Options include:

  • Standard lift, high lift, vertical lift and low headroom track configurations. Follow the roof and pitched tracks available.
  • All tracks supplied with 3m lengths of punched installation angle and side seals

SPRINGS

Individually designed for each door

  • Highest grade springs to EN10270 Class SH specification for
    longer life
  • Fully keyed shaft with adjustable coupler as required
  • Spring break device supplied as standard
  • Drums, end bearing plates, centre bearing plates, PVC spring fillers (152mm diameter springs and duplex assemblies), plugs & winders, securing bolts

OPERATION

Manual doors can be push-up (up to 3000 x 3000mm) or Chain Hoist driven

  • Electric 3ph or 1ph operators available complete with starter and torque bracket
  • A range of safety systems available. Cable break and spring break devices are supplied as standard.